|
#1
Comes with everything needed for
easy application.
#3
Cut off cartridge tip and dispense material
until it flows VERY EASILY!
#5
Begin applying material at top of coverage
area on shoe. Let gravity help material
flow down shoe.
|
#2
AGGRESSIVELY sand the surfaces you
want to coat
#4
Put mixer tip on cartridge and dispense
a 2-3 inch line before applying.
#6
Use stick to smooth material where you
want it within 2 minutes of application.Remove
any masking tape immediately after application.
#7
Once application is finished continue to rotate shoe 5 minutes
so material doesn't drip or run. Let cure for 24 hours.
|
